• Administratively Withdrawn ISA Standards, Technical Reports, and Recommended Practices

    The following ISA standards, technical reports, and recommended practices were withdrawn in the years indicated. Withdrawal of these documents was based on a) the document's material being incorporated into another ISA document, b) the document being replaced by another organization's document, or c) the document's material being agreed upon by the relevant ISA Standards Committee or the Standards & Practices Board to be dated.

    If you have any questions about the withdrawal of these documents, please contact Charley Robinson, ISA Standards Manager, at crobinson@isa.org.

    2014

    ISA-TR12.24.01-1998 (IEC 79-10 Mod), Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2

    ISA-98.00.01-2002, Qualifications and Certification of Control System Technicians

    ISA-TR98.00.02-2006, Skill Standards for Control System Technicians

    2013

    ISA-RP92.0.02-1998 (R2013), Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments: Hydrogen Sulfide

    ISA-RP92.02.02, Part II-1998 (R2013), Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

    ISA-RP92.03.02-1999 (R2013), Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppm Full Scale)

    ISA-RP92.06.02-1999, Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppm - Full Scale)

    ISA-TR99.00.02-2004, Integrating Electronic Security into the Manufacturing and Control Systems Environment

    2012

    ISA-91.00.01-2001, Identification of Emergency Shutdown Systems and Controls That Are Critical to Maintaining Safety in Process Industries

    2011

    ISA-92.0.01, Part I-1998, Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide

    ISA-92.02.01, Part I-1998 (R2007), Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

    ISA-92.03.01-1998, Performance Requirements for Ammonia Detection Instruments (25-500 ppm)

    ISA-92.06.01-1998, Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale)

    ISA-MC96.1-1982, Temperature Measurement Thermocouples

    2009

    ISA-RP75.21-1989 (R1996), Process Data Presentation for Control Valves

    2008

    ISA-50.02-1992, Part 2, Fieldbus Standard for Use in Industrial Control Systems, Part 2: Physical Layer Specification and Service Definition

    ISA-50.02-1997, Part 3, Fieldbus Standard for Use in Industrial Control Systems, Part 3: Data Link Service Definition

    ISA-50.02-1997, Part 4, Fieldbus Standard for Use in Industrial Control Systems, Part 4 : Data Link Protocol Specification

    ISA-50.02-1998, Part 5, Fieldbus Standard for Use in Industrial Control Systems, Part 5 : Application Service Definition

    ISA-50.02-1998, Part 6, Fieldbus Standard for Use in Industrial Control Systems, Part 6 : Application Protocol Specification

    2006

    ISA-82.02.04-1996 (IEC 61010-2-032), Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

    2005

    ISA-RP16.1,2,3-1959, Terminology, Dimensions and Safety Practices for Indicating Variable Area Meters (Rotameters) RP16.1 Glass Tube; RP16.2 Metal Tube; RP16.3 Extension Type Glass Tube

    ISA-RP16.4-1960, Nomenclature and Terminology for Extension Type Variable Area Meters (Rotameters)

    ISA-RP16.5-1961, Installation, Operation, and Maintenance Instructions for Glass Tube Variable Area Meters (Rotameters)

    ISARP16.6-1961, Methods and Equipment for Calibration of Variable Area Meters (Rotameters)

    ISA-26-1968, Dynamic Response Testing of Process Control Instrumentation

    ISA-RP55.1-1975 (R1983), Hardware Testing of Digital Process Computers

    ISA-72.01-1985, PROWAY-LAN Industrial Data Highway

    ISA-72.02-1993, Manufacturing Message Specification: Companion Standard for Process Control