ISA Certified Control Systems Technician (CCST) program

CCST

Certified Control System Technicians (CCSTs) calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables.

CCST question

In troubleshooting a system failure, a suspected bad component is replaced with a known good component. This does not correct the problem. What is the next best course of action?

A.   build software traps involving additional logic and code to detect the problem
B.   further analyze the problem and collect additional data as necessary
C.   set additional alarms to pinpoint the problem
D.   retain a consultant who specializes in this type of repair

 

CCST Answer

The correct answer is B, “further analyze the problem and collect additional data as necessary.”

Troubleshooting is often an iterative process. If the proposed solution is not the correct one, further analysis and data collection are warranted.

Answers A and C are not the best answers because not all component failures involve the process control system or its associated program code and alarms. Sensors, actuators, and other field devices all have replaceable components that can fail. Code and alarms cannot pinpoint a transmitter failure to the analog output circuit, for example.

Answer D is not the best answer because this approach would be very expensive, as there are dozens of specific failure types that may occur. Also, basic troubleshooting does not require a specialized consultant; it can be done effectively by the control technician using the ISA logical and analytical approach to troubleshooting.

Reference: Goettsche, L.D. (Editor), Maintenance of Instruments and Systems, Second Edition, ISA, 2005.

 

Reader Feedback

We want to hear from you! Please send us your comments and questions about this topic to InTechmagazine@isa.org.