AutomationDirect: Digital pressure sensors

Name *: AutomationDirect: Digital pressure sensors
Description *: 
TEPS-series sensors are available with measuring ranges from vacuum up to 5,800 psig. Selectable engineering units, such as bar, mbar, kPa, MPa, inches of water column, and inches of mercury, can be shown on the digital display. The series withstands extreme shock and vibration and incorporates a combination of overpressure, burst pressure, and stability for each measuring range.

Encased in a stainless-steel housing, the EPS-series sensors have an IP67 ingress protection rating, and achieve their atmospheric pressure reference at the four-pin M12 electrical connection. The standard ¼” NPT male process connection allows direct installation without requiring extra fittings. With no moving parts, such as pistons or springs, that can stick or break, two solid-state switch outputs are an alternative to mechanical pressure switches. On certain models, the second output can be configured as a scalable analog signal, turning the unit into a combination pressure switch and transmitter. The built-in two-color digital display indicates the measured pressure and switch set points.
Date Submitted*:  2/6/2018