Aventics: Valve System

Name *: Aventics: Valve System
Description *: 
The essential valve system series is a modular valve system. ES05 orders are supplied as complete assembly kits. All components are unique, and all fittings are of the same type and tightened with the same torque. The portfolio also includes the essential test box, which can be used to test the correct function and leak-tightness of valves before installing the valve system.

The valves come in a housing made of high-performance polymers. Users connect the end and base plates and can extend the system in pairs up to 12 single or double solenoid valves. The valves are controlled via single wiring with a type CI plug according to ISO 15217, a D-Sub connection with 25 pins, with AES valve electronics, or with an integrated IO-Link interface. AES supports all common fieldbus and Ethernet protocols. If necessary, the pilot coils can also be turned at a later stage for mixed connection configurations. With a switching time of less than 35 milliseconds for all valve functions, dynamic action is guaranteed for short cycles. With single wiring, the ES05 complies with protection class IP65, so the valve system can also be installed in decentral locations, even in environments exposed to splash water. All other connection types comply with protection class IP50.The SPM 401 series stainless-steel, media-isolate pressure sensors are especially suitable for low-pressure and smaller applications. Media-isolated sensors can operate in hostile environments with the sensitivity, linearity, and hysteresis of a silicon sensor. The sensor is compatible with 316L stainless steel, a type of steel that increases corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at high temperatures. The piezo sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless-steel diaphragm and body.
URL*:  www.aventics.us
Date Submitted*:  2/3/2017