ISA12, Electrical Equipment for Hazardous Locations
 |
- Industrial Air Measurement Standards and User Resources, 2nd Edition |
|
ANSI/ISA-12.00.02-2009 - Certificate Standard for AEx Equipment for Hazardous (Classified) Locations |
|
ANSI/ISA-12.00.02-2009 - Certificate Standard for AEx Equipment for Hazardous (Classified) Locations |
|
ANSI/ISA-12.01.01-2009 - Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations |
|
ANSI/ISA-12.01.01-2009 - Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations |
|
ANSI/ISA-12.04.04-2012 - Pressurized Enclosures |
|
ANSI/ISA-12.04.04-2012 - Pressurized Enclosures |
|
ANSI/ISA-12.12.01-2012 - Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
|
ANSI/ISA-12.12.01-2012 - Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
|
ANSI/ISA-12.12.03-2011 - Standard for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations |
|
ANSI/ISA-12.12.03-2011 - Standard for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations |
|
ANSI/ISA-12.13.01-2002 - Performance Requirements for Combustible Gas Detectors (Downloadable) |
|
ANSI/ISA-12.13.01-2002 - Performance Requirements for Combustible Gas Detectors |
|
ANSI/ISA-12.13.04-2007 - Performance Requirements for Open Path Combustible Gas Detectors |
|
ANSI/ISA-12.13.04-2007 - Performance Requirements for Open Path Combustible Gas Detectors |
|
ANSI/ISA-12.20.01-2009 - General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations |
|
ANSI/ISA-12.20.01-2009 - General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations |
|
ANSI/ISA-12.27.01-2011 - Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids |
|
ANSI/ISA-12.27.01-2011 - Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids |
|
ANSI/ISA-60079-0 (12.00.01)-2009 - Explosive atmospheres - Part 0: Equipment - General Requirements |
|
ANSI/ISA-60079-0 (12.00.01)-2009 - Explosive atmospheres - Part 0: Equipment - General Requirements |
|
ANSI/ISA-60079-1 (12.22.01)-2009 - Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d" |
|
ANSI/ISA-60079-1 (12.22.01)-2009 - Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d" |
|
ANSI/ISA-60079-11 (12.02.01)-2012 - Explosive Atmospheres - Part 11: Equipment protection by intrinsic safety "i" (6th Edition) |
|
ANSI/ISA-60079-11 (12.02.01)-2012 - Explosive Atmospheres - Part 11: Equipment protection by intrinsic safety "i" (6th Edition) |
|
ANSI/ISA-60079-15 (12.12.02)-2012 - Explosive Atmospheres - Part 15: Equipment protection by type of protection "n" (Edition 4) |
|
ANSI/ISA-60079-15 (12.12.02)-2012 - Explosive Atmospheres - Part 15: Equipment protection by type of protection "n" (Edition 4) |
|
ANSI/ISA-60079-18 (12.23.01)-2012 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
|
ANSI/ISA-60079-18 (12.23.01)-2012 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
|
ANSI/ISA-60079-2 (12.04.01)-2010 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures "p" |
|
ANSI/ISA-60079-2 (12.04.01)-2010 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures "p" |
|
ANSI/ISA-60079-25 (12.02.05)-2011 - Explosive Atmospheres - Part 25: Intrinsically safe electrical systems |
|
ANSI/ISA-60079-25 (12.02.05)-2011 - Explosive Atmospheres - Part 25: Intrinsically safe electrical systems |
|
ANSI/ISA-60079-26 (12.00.03)-2011 - Explosive atmospheres - Part 26: Equipment for Use in Class I, Zone 0 Hazardous (Classified) Locations |
|
ANSI/ISA-60079-26 (12.00.03)-2011 - Explosive atmospheres - Part 26: Equipment for Use in Class I, Zone 0 Hazardous (Classified) Locations |
|
ANSI/ISA-60079-27 (12.02.04)-2006 - Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
|
ANSI/ISA-60079-27 (12.02.04)-2006 - Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
|
ANSI/ISA-60079-28 (12.21.02)-2012 - Explosive Atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
ANSI/ISA-60079-28 (12.21.02)-2012 - Explosive Atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
ANSI/ISA-60079-29-2 (12.13.02)-2012 - Explosive Atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
|
ANSI/ISA-60079-29-2 (12.13.02)-2012 - Explosive Atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
|
ANSI/ISA-60079-31 (12.10.03)-2009 - ANSI/ISA-60079-31 (12.10.03)-2009, Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
|
ANSI/ISA-60079-31 (12.10.03)-2009 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
|
ANSI/ISA-60079-5 (12.00.04)-2009 - Explosive atmospheres - Part 5: Equipment Protection by Powder Filling "q" |
|
ANSI/ISA-60079-5 (12.00.04)-2009 - Explosive atmospheres - Part 5: Equipment Protection by Powder Filling "q" |
|
ANSI/ISA-60079-6 (12.00.05)-2009 - Explosive atmospheres - Part 6: Equipment Protection by Oil Immersion "o" |
|
ANSI/ISA-60079-7 (12.16.01)-2008 - , Explosive Atmospheres - Part 7: Equipment protection by increased safety "e" |
|
ANSI/ISA-60079-7 (12.16.01)-2008 - Explosive Atmospheres - Part 7: Equipment protection by increased safety "e" |
|
ANSI/ISA-61241-0 (12.10.02)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements |
|
ANSI/ISA-61241-0 (12.10.02)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21, and Zone 22 Hazardous (Classified) Locations - General Requirements |
|
ANSI/ISA-61241-1 (12.10.03)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD" |
|
ANSI/ISA-61241-1 (12.10.03)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD" |
|
ANSI/ISA-61241-11 (12.10.04)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD" |
|
ANSI/ISA-61241-11 (12.10.04)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD" |
|
ANSI/ISA-61241-18 (12.10.07)-2006 (R2011 - Electrical apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "mD" |
|
ANSI/ISA-61241-2 (12.10.06)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurication "pD" |
|
ANSI/ISA-61241-2 (12.10.06)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD" |
|
ANSI/ISA-RP12.06.01-2003 - Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety (Downloadable) |
|
ANSI/ISA-RP12.06.01-2003 - Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety |
|
ANSI/ISA-TR12.12.04-2011 - Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location |
|
ANSI/ISA-TR12.12.04-2011 - Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location |
|
ANSI/ISA-TR12.13.01-1999 (R2010) - Flammability Characteristics of Combustible Gases and Vapors |
|
ANSI/ISA-TR12.13.01-1999 (R2010) - Flammability Characteristics of Combustible Gases and Vapors |
|
ANSI/ISA-TR12.13.02-1999 (R2010) - Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries |
|
ANSI/ISA-TR12.13.02-1999 (R2010) - Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries |
|
ANSI/ISA-TR12.13.03-2009 - Guide for Combustible Gas Detection as a Method of Protection |
|
ANSI/ISA-TR12.13.03-2009 - Guide for Combustible Gas Detection as a Method of Protection |
|
ANSI/ISA-TR12.21.01-2004 - Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations (Downloadable) |
|
ANSI/ISA-TR12.21.01-2004 - Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations |
|
ISA-12.10-1988 - Area Classification in Hazardous (Classified) Dust Locations (Downloadable) |
|
ISA-12.10-1988 - Area Classification in Hazardous (Classified) Dust Locations |
|
ISA-RP12.2.02-1996 - Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings |
|
ISA-RP12.2.02-1996 - Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings (Downloadable) |
|
ISA-TR12.2-1995 - Intrinsically Safe System Assessment Using the Entity Concept (Downloadable) |
|
ISA-TR12.2-1995 - Intrinsically Safe System Assessment Using the Entity Concept |
|
ISA-TR12.24.01-1998 - (IEC 60079-10 Mod) - Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2 |
|
ISA-TR12.24.01-1998 - (IEC 60079-10 Mod) - Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2 (Downloadable) |
