Home

ISA Standards Committees

Apply to serve on a Committee
ISA2, Manometer Tables
ISA5, Documentation of Msrmt. and Control Instruments and Systems
ISA5.1, Instrumentation Symbols and Identification
ISA5.2, Binary Control Logic Diagrams for Process Operations
ISA5.4, Instrument Loop Diagrams
ISA5.5, Graphic Symbols for Process Displays
ISA5.6, Software Documentation for Control Systems
ISA5.7, Dev. and Use of Prcs. Flow Diag. and Ppng. and Instr. Diag.
ISA5.8, Measurement & Control Terminology Review Subcommittee
ISA7, Instrument Air Standards Committee
ISA12, Electrical Equipment for Hazardous Locations
ISA12.0, Gen. Requirements for Elec. Equip. in Hazard. Locations
ISA12.1, Reference Committee on Hazardous Locations
ISA12.10, Area Classification in Hazardous Dust Locations
ISA12.12, Apparatus for Division 2 Hazardous Locations
ISA12.13, Performance Requirements for Combustible Gas Detectors
ISA12.16, Increased Safety for Zone 1, Hazardous Locations
ISA12.2, Intrinsic Safety
ISA12.20, Elec. Ign.Syst. for Int. Comb. Engines in Hazard. Areas
ISA12.21, Optically radiating equipment and fiber optics in hazardous
ISA12.22, Explosionproof and Flameproof Enclosures
ISA12.23, Encapsulation
ISA12.24, Class. of Hazard. Loc. for the Install. of Elec. Equip.
ISA12.25, Powder Filling
ISA12.26, Oil Immersion
ISA12.27, Seals
ISA12.28, Mining Working Group
ISA12.29, Equipment Protection Levels (EPL) Working Group
ISA12.4, Instr. Purging for Reduction of Hazard. Area Class.
ISA12.CAG, SP12 Chairman's Advisory Group
ISA18, Instrument Signals and Alarms
ISA20, Instrument Specification Forms
ISATAG31, Equipment for Explosive Atmospheres
ISATAG31A, Flameproof Enclosures
ISATAG31G, Intrinsically-Safe Apparatus
ISATAG31H, Apparatus for Use in the Presence of Combustible Dust
ISATAG31J, Classification of Hazardous Areas & Installation Requirement
ISATAG31L, Electrical Apparatus for the Detection of Flammable Gases
ISATAG31M, Non-electrical equipment and protective systems for explosiv
ISA37, Measurement Transducers
ISA42, Nomenclature for Instrument Tube Fittings
ISA50, Signal Compatibility of Electrical Instruments
ISA50.1, Introduction Subcommittee
ISA50.2, Physical Layer Subcommittee
ISA50.3, Data Link Subcommittee
ISA50.4, Application Subcommittee
ISA50.5, Application Layer Stack
ISA50.6, System and Network Management
ISA52, Environments for Standards Laboratories
ISA55, Hardware Testing of Digital Process Computers
ISA60, Control Centers
ISATAG65, Industrial-Process Measurement and Control
ISATAG65A, System Aspects
ISATAG65B, Measurement and Control Devices
ISATAG65C, Industrial Networks
ISATAG65E, Devices and integration in Enterprise Systems
ISATAG66, Safety of Measuring, Control and Laboratory Equipment
ISA67, Nuclear Power Plant Standards
ISA67.01, Transduc. and Transmit. Install. for Nuclear Safety Applic.
ISA67.02, Instr. Sens Line Pip. and Tub. Stds. for Use in Nucl. PP
ISA67.03, Reactor Coolant-Pressure-Boundary Leak Detection
ISA67.04, Setpoints for Safety-Rel. Instrumentation Used in Nucl. PP
ISA67.04WGB3, Single-Sided Setpoints & Confidence Intervals
ISA67.06, Perf. Monitorg fr Nuc Sfty-Relatd Inst. Chan in Nuc. Plants
ISA67.14, Qual. and Cert. of Inst. and Cntrl. Technicians in Nucl. PP
ISA67.16, Safety-Related, Digital-Based Syst. Upgrades at Nucl. PP
ISA67.16WG1, EMI/RFI Design Requirements
ISA67.16WG2, Commercial Grade Dedication of Digital-Based Systems
ISA67.16WG4, Digital System Design Guide
ISA67.16WG5, Cyber Security for the Nuclear Power Industry
ISA71, Environmental Conditions for Process Measurement and Control
ISA74, Continuous Weighing Instrumentation
ISA75, Control Valve Standards
ISA75.01, Control Valve Sizing Equations
ISA75.02, Control Valve Capacity Test Procedures
ISA75.04, Control Valve Stability
ISA75.05, Control Valve Terminology
ISA75.07, Control Valve Noise Measurement and Prediction
ISA75.08, Control Valve Face-to-Face Dimensions
ISA75.09, Digital Final Control Elements/Digital Actuators
ISA75.10, Flexible Clamp or Pinch Valves
ISA75.11, Control Valve Flow Characteristics and Rangeability
ISA75.13, Valve Positioner Performance
ISA75.14, Control Valve Data Sheets
ISA75.15, Process Data Presentation
ISA75.16, Control Valve Cavitation
ISA75.19, Hydrostatic Testing of Control Valves
ISA75.23, Control Valve Cavitation
ISA75.24, Control Valve Actuator Sizing and Selection
ISA75.25, Control Valve Dynamic Testing
ISA75.26, Valve Diagnostic Testing
ISA75.27, Cryogenic Control Valve Seat Leakage Test Standard
ISA76, Composition Analyzers
ISA77, Fossil Power Plant Standards
ISA77.13, Turbine Steam By-Pass Systems
ISA77.14, Steam Turbine Controls
ISA77.20, Fossil Simulators Functional Requirements
ISA77.22, Power Plant Automation
ISA77.30, Dynamic Performance of Power Plant Control Systems
ISA77.40WG1, Fossil Fuel Power Plant Functional Diagram Usage
ISA77.41, Combustion Controls
ISA77.42, Feedwater Control
ISA77.43, Unit/Plant Demand Development
ISA77.44, Steam Temperature Controls
ISA77.60, Human-Machine Interface
ISA77.70, Fossil Fuel Power Plant Instrument Piping Installation
ISA77.82, Fossil Fuel Power - SCR Control Systems
ISA82, Electrical and Electronic Instrumentation
ISA84, Electrical/Electronic/Programmable Electronic Systems (E/E/P
ISATAG85, Measuring Equipment for Electrical and Electromagnetic Quant
ISA88, Batch Control Systems
ISA90, Instrumentation and Computer Grounding
ISA91, Criticality Ranking for Instrumentation
ISA92, Perf. Req. for Ind. Air Meas. Instr. Rel. to Hlth. and Sfty.
ISA93, Sealing Technologies Committee
ISA95, Enterprise/Control Integration Committee
ISA96, Valve Actuator Committee
ISA96.01, Valve Actuator Terminology
ISA96.02, Electric Actuators
ISA96.03, Pneumatic Actuators
ISA96.04, Hydraulic Actuators
ISA96.05, Partial Stroke Testing for Valve Actuators
ISA96.06, Electro-Hydraulic Actuators
ISA97, In-Line Sensors Committee
ISA98, Personnel Certification Standards Committee
ISA98.01, Qualifications and Certification of Control Sys Technicians
ISA99, Industrial Automation and Control Systems Security
ISA100, Wireless Systems for Automation
ISA100.12, WirelessHART Convergence Subcommittee
ISA101, Human-Machine Interface
ISA102, High-Power Research & Development Electrical Systems
ISA103, Field Device Tools (FDT)
ISA104, Device Integration
ISA105, Commissioning, Loop Checks, and Factory & Site Acceptance/In
ISA106, Procedure Automation for Continuous Process Operations
ISA107, Advanced Measurement Techniques for Gas Turbine Engines
ISA107.1, Tip Timing
ISA107.2, Thermographic Phosphor
ISA107.3, Tip Clearance
ISA107.4, Wireless Standards for Turbine Engine Test Stands
ISA107.5, Dynamic Pressure Standards for Turbine Engine Testing
ISA108, Intelligent Device Management
ISA111, Unified Automation for Buildings