Find StandardsSearch Standards
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Name | ISA Member Price | Affiliate Member Price | Community Member/List Price |
|---|---|---|---|
| ISA-RP2.1-1978 - Manometer Tables | $48.00 | $54.00 | $60.00 |
| Presents abbreviations and fundamental conversion factors commonly used in manometry, recommended definitions of pressure in terms of a column of merc... more | |||
| ANSI/ISA-5.1-2009 - Instrumentation Symbols and Identification | $120.00 | $135.00 | $150.00 |
| This widely used standard establishes a uniform means of depicting and identifying instruments or devices and their inherent functions, instrumentatio... more | |||
| ISA-TR5.1.01 - ISA-TR77.40.01-2012 - Functional Diagram Usage | $48.00 | $54.00 | $60.00 |
| This technical report is to expand on and illustrate usage of function block symbols and functions and to prepare examples in development of complex f... more | |||
| ISA-5.2-1976 (R1992) - Binary Logic Diagrams For Process Operations | $48.00 | $54.00 | $60.00 |
| Provides symbols for binary operating functions. Intended to symbolize the binary operating functions of a system in a manner that can be applied to a... more | |||
| ISA-5.3-1983 - Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic, and Computer Systems | $48.00 | $54.00 | $60.00 |
| Scope:
This standard satisfies the requirements for symbolically representing the functions of distributed control/shared display instrumentat... more | |||
| ISA-5.4-1991 - Instrument Loop Diagrams | $48.00 | $54.00 | $60.00 |
| Scope:
This standard establishes minimum required information and identifies additional optional information for a loop diagram for an individ... more | |||
| ISA-5.5-1985 - Graphic Symbols for Process Displays | $60.00 | $67.50 | $75.00 |
| Scope:
The standard is suitable for use in the chemical, petroleum, power generation, air conditioning, metal refining, and numerous other ind... more | |||
| ANSI/ISA-5.06.01-2007 - Functional Requirements Documentation for Control Software Applications | $72.00 | $81.00 | $90.00 |
| • Covers real-time batch, discrete and continuous process automation systems.
• Defines regulatory, event-driven and time-driven control system actio... more | |||
| ISA-7.0.01-1996 - Quality Standard for Instrument Air | $88.00 | $99.00 | $110.00 |
| Scope:
The scope of this Standard is
to provide limits for moisture content in instrument quality air;
to provide limits for ... more | |||
| ANSI/ISA-12.00.02-2009 - Certificate Standard for AEx Equipment for Hazardous (Classified) Locations | $40.00 | $45.00 | $50.00 |
| This standard defines minimum elements and format for certificates for AEx equipment to align with those for the IECEx Certificate of Conformity.... more | |||
| ANSI/ISA-12.01.01-2009 - Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations | $120.00 | $135.00 | $150.00 |
| This document provides definitions and information pertaining to protection techniques, terminology, and the installation of electrical equipment in h... more | |||
| ISA-TR12.2-1995 - Intrinsically Safe System Assessment Using the Entity Concept | $40.00 | $45.00 | $50.00 |
| Provides information and examples for assessing intrinsic safety of a wide variety of control loops using the control drawings and the entity concept.... more | |||
| ISA-RP12.2.02-1996 - Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings | $32.00 | $36.00 | $40.00 |
| Provides guidance in the preparation of control drawings for intrinsically safe apparatus, associated apparatus, and intrinsically safe systems. It is... more | |||
| ANSI/ISA-12.04.04-2012 - Pressurized Enclosures | $48.00 | $54.00 | $60.00 |
| This standard applies to equipment made suitable for use in hazardous (classified) locations by pressurizing the use of a pressurizing system.
This... more | |||
| ANSI/ISA-RP12.06.01-2003 - Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety | $72.00 | $81.00 | $90.00 |
| This recommended practice is intended to promote the uniform installation of intrinsically safe
systems for hazardous (classified) locations. Informa... more | |||
| ISA-12.10-1988 - Area Classification in Hazardous (Classified) Dust Locations | $40.00 | $45.00 | $50.00 |
| Scope:
This standard refers only to combustible mixtures created by dusts — such as agricultural, carbonaceous, plastic, chemical, and metal d... more | |||
| ANSI/ISA-12.12.01-2012 - Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations | $55.00 | $60.00 | $65.00 |
| This standard provides minimum requirements for the design, construction, and marking of electrical equipment or parts of such equipment for use in Cl... more | |||
| ANSI/ISA-12.12.03-2011 - Standard for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations | $40.00 | $45.00 | $50.00 |
| This standard provides guidance for the use of selected general-purpose portable electronic products in certain hazardous (classified) locations and i... more | |||
| ANSI/ISA-TR12.12.04-2011 - Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location | $32.00 | $36.00 | $40.00 |
| A location in which the fire or explosion hazard exists infrequently and for short periods is designated as a Division 2 or Zone 2 location. Two of t... more | |||
| ANSI/ISA-TR12.13.01-1999 (R2010) - Flammability Characteristics of Combustible Gases and Vapors | $88.00 | $99.00 | $110.00 |
| Flammability Characteristics of Combustible Gases and Vapors is reprinted in its entirety by permission of the publisher, the Bureau of Mines, ... more | |||
| ANSI/ISA-12.13.01-2002 - Performance Requirements for Combustible Gas Detectors | $104.00 | $117.00 | $130.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-TR12.13.02-1999 (R2010) - Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries | $88.00 | $99.00 | $110.00 |
| Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries - A Manual, by Kuchta, 1985, is hereby repri... more | |||
| ANSI/ISA-TR12.13.03-2009 - Guide for Combustible Gas Detection as a Method of Protection | $40.00 | $45.00 | $50.00 |
| Combustible gas detection used for process safety management may also be used to provide protection from explosion or fires by minimizing the possibil... more | |||
| ANSI/ISA-12.13.04-2007 - Performance Requirements for Open Path Combustible Gas Detectors | $88.00 | $99.00 | $110.00 |
| This standard provides minimum requirements for fixed and transportable open path gas detection
apparatus. This standard specifies the construction,... more | |||
| ANSI/ISA-12.20.01-2009 - General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations | $60.00 | $67.50 | $75.00 |
| This standard is intended to enhance the safety of personnel by providing minimum requirements for electrical ignition systems for spark-ignited recip... more | |||
| ANSI/ISA-TR12.21.01-2004 - Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations | $60.00 | $67.50 | $75.00 |
| This Technical Report provides guidance on the safe use of fiber optic systems and their
constituent parts producing or guiding visible, near infrare... more | |||
| ISA-TR12.24.01-1998 - (IEC 60079-10 Mod) - Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2 | $88.00 | $99.00 | $110.00 |
| (Please note that this ISA document is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-12.27.01-2011 - Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids | $60.00 | $67.50 | $75.00 |
| This document provides specific requirements for process sealing between electrical systems and flammable or combustible process fluids where a failur... more | |||
| ISA-18.1-1979 - (R2004) - Annunciator Sequences and Specifications | $60.00 | $67.50 | $75.00 |
| Scope:
This Standard is primarily for use with electrical annunciators that call attention to abnormal process conditions by the use of indivi... more | |||
| ANSI/ISA-18.2-2009 - Management of Alarm Systems for the Process Industries | $144.00 | $162.00 | $180.00 |
| This standard addresses the development, design, installation, and management of alarm systems in the process industries. Alarm system management incl... more | |||
| ISA-TR18.2.4-2012 - Enhanced and Advanced Alarm Methods | $104.00 | $117.00 | $130.00 |
| This technical report provides guidance on enhanced and advanced alarm methods and focuses on the scope of Clause 12 of ISA-18.2. Enhanced alarm desig... more | |||
| ISA-TR18.2.5-2012 - Alarm System Monitoring, Assessment, and Auditing | $104.00 | $117.00 | $130.00 |
| This technical report provides guidance on monitoring, assessment and audit of alarms. TR5 focuses on the scope of ANSI/ISA-18.02-2009 Clauses 16 and ... more | |||
| ISA-TR18.2.6-2012 - Alarm Systems for Batch and Discrete Processes | $104.00 | $117.00 | $130.00 |
| This technical report covers the application of alarm management principles in ISA-18.2 to batch and discrete processes. The general principles and te... more | |||
| ISA-20-1981 - Specification Forms for Process Measurement and Control Instruments, Primary Elements, and Control Valves | $104.00 | $117.00 | $130.00 |
| Provides forms (checklist) to promote uniformity in instrument specification, both in content and form, by listing and providing space for principal d... more | |||
| ISA-TR20.00.01-2007 - Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations-Updated with 27 new specification forms in 2004-2006 and updated with 11 new specification forms in 2007 | $120.00 | $135.00 | $150.00 |
| This updated standard includes an expanded series of 51 Specification Forms developed in 2001, augmented by 20 new forms developed in 2004-2006 and 11... more | |||
| ISA-20.00.03-2001 - Specification Forms for Process Measurement and Control Instruments Part 3: Form Requirements and Development Guidelines | $32.00 | $36.00 | $40.00 |
| This standard establishes requirements for instrument specification forms to be published by ISA. Its use is recommended for organizations that develo... more | |||
| ISA-RP31.1-1977 - Specification, Installation, and Calibration of Turbine Flowmeters | $32.00 | $36.00 | $40.00 |
| Establishes minimum ordering information; recommended acceptance, and qualification test methods, including calibration techniques; uniform terminolog... more | |||
| ISA-37.1-1975 - (R1982) - Electrical Transducer Nomenclature and Terminology | $32.00 | $36.00 | $40.00 |
| Scope:
This Standard covers transducers used in electrical and electronic measuring systems. It is realized that this Standard may not be whol... more | |||
| ISA-RP37.2-1982 - (R1995) - Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing | $48.00 | $54.00 | $60.00 |
| Covers piezoelectric acceleration transducers, primarily those used in aerospace test instrumentation. Terminology used in this document follows ISA-3... more | |||
| ISA-37.3-1982 - (R1995) - Specifications and Tests for Strain Gage Pressure Transducers | $48.00 | $54.00 | $60.00 |
| Establishes uniform minimum specifications for design and performance characteristics; uniform acceptance and qualification test methods, including ca... more | |||
| ISA-37.5-1982 - (R1995) - Specifications and Tests for Strain Gage Linear Acceleration Transducers | $48.00 | $54.00 | $60.00 |
| Establishes uniform minimum specifications for design and performance characteristics; uniform acceptance and qualification test methods including cal... more | |||
| ISA-37.6-1982 - (R1995) - Specifications and Tests for Potentiometric Pressure Transducers | $48.00 | $54.00 | $60.00 |
| Establishes uniform minimum specifications for design and performance characteristics; uniform acceptance and qualification test methods, including ca... more | |||
| ISA-37.8-1982 - (R1995) - Specifications and Tests for Strain Gage Force Transducers | $48.00 | $54.00 | $60.00 |
| Outlines uniform general specifications, acceptance and qualification methods, methods for data presentation, and includes a drawing symbol used in el... more | |||
| ISA-37.10-1982 - (R1995) - Specifications and Tests for Piezoelectric Pressure and Sound-Pressure Transducers | $48.00 | $54.00 | $60.00 |
| Establishes uniform specifications for describing design and performance characteristics, acceptance and qualification test methods, and calibration t... more | |||
| ISA-37.12-1982 - (R1995) - Specifications and Tests for Potentiometric Displacement Transducers | $48.00 | $54.00 | $60.00 |
| Covers potentiometric displacement transducers, primarily those used in measuring systems. The specifications are not intended to cover transducers us... more | |||
| ISA-37.16.01-2002 - A Guide for the Dynamic Calibration of Pressure Transducers | $60.00 | $67.50 | $75.00 |
| This standard covers dynamic pressure transducers, which are, primarily “those” used in measurements.... more | |||
| ISA-RP42.00.01-2001 - Nomenclature for Instrument Tube Fittings | $40.00 | $45.00 | $50.00 |
| This Recommended Practice defines nomenclature for tube fittings most commonly used in
instrumentation. It is not intended as a substitute for manufa... more | |||
| ANSI/ISA-50.00.01-1975 (R2012) - Compatibility of Analog Signals for Electronic Industrial Process Instruments | $32.00 | $36.00 | $40.00 |
| This document applies to analog dc signals used in process control and monitoring systems to transmit information between subsystems or separated elem... more | |||
| ISA-TR50.02, Parts 3 & 4-2000 - Fieldbus Standard for Use in Industrial Control Systems, Parts 3 & 4: Technical Report for Fieldbus Data Link Layer — Tutorial | $104.00 | $117.00 | $130.00 |
| The technical report is divided into two parts.
Part A
presents the specific reasons why certain features in ISA's DLL documents ... more | |||
| ISA-TR50.02, Part 9, 2000 - Fieldbus Standard for Use in Industrial Control Systems: User Layer Technical Report | $104.00 | $117.00 | $130.00 |
| This Technical Report defines the details of the field bus process control user layer for continuous and batch process control applications, as well a... more | |||
| ISA-51.1-1979 - (R1993) - Process Instrumentation Terminology | $72.00 | $81.00 | $90.00 |
| Provides guidance for vendor/user understanding when referring to product specifications, performance, and operating conditions. It is primarily inten... more | |||
| ISA-TR52.00.01-2006 - Recommended Environments for Standards Laboratories | $48.00 | $54.00 | $60.00 |
| The measured value assigned to a standard or measurement instrument has the essential qualification that the assigned value was valid at the specific ... more | |||
| ISA-RP60.1-1990 - Control Center Facilities | $32.00 | $36.00 | $40.00 |
| Scope:
This document is intended to be used as a guide in the preparation of engineering designs and specifications for control center facilit... more | |||
| ISA-RP60.2-1995 - Control Center Design Guide and Terminology | $40.00 | $45.00 | $50.00 |
| Scope:
This document is included as a guide to initiating, designing, specifying, procuring, testing, accepting, and installing a control cent... more | |||
| ISA-RP60.3-1985 - Human Engineering for Control Centers | $40.00 | $45.00 | $50.00 |
| Scope:
The intent of this recommended practice is to present design concepts which are compatible with the physical and mental capabilities of... more | |||
| ISA-RP60.4-1990 - Documentation for Control Centers | $40.00 | $45.00 | $50.00 |
| Scope:
This recommended practice covers the type, content, and extent of documentation required as record data and information particular to a... more | |||
| ISA-RP60.6-1984 - Nameplates, Labels, and Tags for Control Centers | $48.00 | $54.00 | $60.00 |
| Scope:
This Recommended Practice is intended to summarize identification methods and to suggest the uses of nameplates, labels, and tags. Exam... more | |||
| ISA-RP60.8-1978 - Electrical Guide for Control Centers | $32.00 | $36.00 | $40.00 |
| Scope:
This document is intended to assist the design engineer in establishing the electrical requirements of a control center; it is also int... more | |||
| ISA-RP60.9-1981 - Piping Guide for Control Centers | $32.00 | $36.00 | $40.00 |
| Scope:
This Recommended Practice is intended to assist the designer or engineer in the definition of piping requirements for pneumatic signals... more | |||
| ISA-RP60.11-1991 - Crating, Shipping, and Handling for Control Centers | $48.00 | $54.00 | $60.00 |
| Scope:
This recommended practice describes general crating methods available for protection against physical damage, vibration, pilferage, and... more | |||
| ISA-67.01.01-2002 (R2007) - Transducer and Transmitter Installation for Nuclear Safety Applications | $48.00 | $54.00 | $60.00 |
| This document covers the installation of transducers for nuclear safety-related applications. This document establishes requirements and recommendatio... more | |||
| ISA-67.02.01-1999 - Nuclear Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants | $48.00 | $54.00 | $60.00 |
| Scope:
This Standard covers design, protection, and installation of nuclear safety-related instrument-sensing lines and sampling lines for nuc... more | |||
| ISA-67.03-1982 - Standard for Light Water Reactor Coolant Pressure Boundary Leak Detection | $40.00 | $45.00 | $50.00 |
| Scope:
This standard covers identification and quantitative measurement of reactor coolant system leakage in light water cooled power reactors... more | |||
| ANSI/ISA-67.04.01-2006 (R2011) - Setpoints for Nuclear Safety-Related Instrumentation | $35.00 | $40.00 | $45.00 |
| This standard defines the requirements for assessing, establishing, and maintaining nuclear safety-related and other important instrument setpoints as... more | |||
| ISA-RP67.04.02-2010 - Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation | $144.00 | $162.00 | $180.00 |
| This recommended practice provides guidance for the implementation of ANSI/ISA-67.04.01-
2006 in the following areas:
a) Methodologies, including ... more | |||
| ISA-TR67.04.08-1996 - Setpoints for Sequenced Actions | $48.00 | $54.00 | $60.00 |
| Scope:
This Technical Report provides guidance on the handling of setpoints for sequenced actions in both nuclear safety-related and nuclear p... more | |||
| ISA-TR67.04.09-2005 - Graded Approaches to Setpoint Determination | $48.00 | $54.00 | $60.00 |
| This Technical Report provides guidance on a graded approach for calculating and documenting channel and indication uncertainties as well as for docum... more | |||
| ISA-67.06.01-2002 - Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants | $60.00 | $67.50 | $75.00 |
| This standard provides the nuclear power industry methods for assuring that nuclear safety-related instrument channels satisfy acceptable calibration,... more | |||
| ISA-67.14.01-2000 - Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities | $40.00 | $45.00 | $50.00 |
| Scope:
This standard identifies the criteria for certification of instrumentation and control technicians at nuclear facilities. These criteri... more | |||
| ISA-71.01-1985 - Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity | $32.00 | $36.00 | $40.00 |
| Scope:
This standard covers temperature and humidity environmental conditions for industrial process measurement and control equipment. Specif... more | |||
| ISA-71.02-1991 - Environmental Conditions for Process Measurement and Control Systems: Power | $32.00 | $36.00 | $40.00 |
| Scope:
This standard classifies power parameters that affect industrial process measurement and control equipment. Specifications for other en... more | |||
| ISA-71.03-1995 - Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences | $32.00 | $36.00 | $40.00 |
| Scope:
This standard encompasses mechanical influences, specifically shock and vibration, for industrial process measurement and control syste... more | |||
| ISA-71.04-1985 - Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants | $32.00 | $36.00 | $40.00 |
| Scope:
This standard covers airborne contaminants and biological influences that affect industrial process measurement and control equipment. ... more | |||
| ISA-RP74.01-1984 - Application and Installation of Continuous-Belt Weighbridge Scales | $32.00 | $36.00 | $40.00 |
| Scope:
The recommended practice will provide an effective base of comparison of scale suppliers, will establish minimum values, and will ensur... more | |||
| ANSI/ISA-75.01.01-2012 (60534-2-1 MOD) - Industrial-Process Control Valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions | $292.00 | $322.00 | $352.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-75.02.01-2008 (IEC 60534-2-3 Mod) - Control Valve Capacity Test Procedures | $169.00 | $135.00 | $199.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ISA-TR75.04.01-1998 (R2006) - Control Valve Position Stability | $32.00 | $36.00 | $40.00 |
| This document discusses control valve stem position mechanical stability and establishes a measurement criterion for position instability of the valve... more | |||
| ANSI/ISA-75.05.01-2000 (R2005) - Control Valve Terminology | $48.00 | $54.00 | $60.00 |
| Scope:
This standard contains terminology for control valves.
Purpose:
To provide a glossary of definitions commonly used in the c... more | |||
| ISA-75.07-1997 - Laboratory Measurement of Aerodynamic Noise Generated by Control Valves | $32.00 | $36.00 | $40.00 |
| Scope:
This standard defines equipment, methods, and procedures for the laboratory testing and measurement of airborne sound radiated by a com... more | |||
| ANSI/ISA-75.08.01-2002 (R2007) - Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) | $32.00 | $36.00 | $40.00 |
| This standard applies to integral flanged globe-style control valves, sizes 15 mm (1/2 inch) through 400 mm (16 inches), having top, top and bottom, p... more | |||
| ANSI/ISA-75.08.02-2003 (R2009) - Face-to-Face Dimensions for Flanged and Flangeless Rotary Control Valves (Classes 150, 300, and 600) | $32.00 | $36.00 | $40.00 |
| This standard applies to flanged and flangeless rotary control valves using a full ball or a segment of a ball and other rotary-stem control valves, s... more | |||
| ANSI/ISA-75.08.03-2001 (R2013) - Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) | $32.00 | $36.00 | $40.00 |
| This standard applies to socket weld-end globe-style control valves, sizes 1/2 inch (15 mm) through 4 inches (100 mm), and screwed-end globe-style con... more | |||
| ANSI/ISA-75.08.04-2001 (R2013) - Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500) | $32.00 | $36.00 | $40.00 |
| This standard applies to buttweld-end globe-style control valves, sizes 1/2 inch (15 mm) through 8 inches (200 mm), having top and cage guiding.... more | |||
| ANSI/ISA-75.08.05-2002 (R2007) - Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900, 1500, and 2500) | $32.00 | $36.00 | $40.00 |
| This standard applies to buttweld-end globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm (18 inches) for Classes 150 through 2500, havi... more | |||
| ANSI/ISA-75.08.06-2002 (R2013) - Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) | $32.00 | $36.00 | $40.00 |
| This standard applies to flanged globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm (18 inches), having top, top and bottom, port, or c... more | |||
| ANSI/ISA-75.08.07-2001 (R2013) - Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) | $32.00 | $36.00 | $40.00 |
| This standard applies to flanged globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm (18 inches), having top, top and bottom, port, or c... more | |||
| ANSI/ISA-75.08.08-1999 (R2007) - Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300, and 600) | $32.00 | $36.00 | $40.00 |
| This standard applies to raised-face flanged globe-style angle control valves, 1 inch through 8 inches.... more | |||
| ANSI/ISA-75.08.09-2005 (R2010 - ), Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600) | $32.00 | $36.00 | $40.00 |
| This standard applies to sliding stem flangeless control valves, sizes 20 mm (3/4 inch) through
600 mm (24 inches) for Classes 150, 300, and 600.... more | |||
| ANSI/ISA-75.10.01-2008 - General Requirements for Clamp or Pinch Valves | $32.00 | $36.00 | $40.00 |
| This document applies to valves, sizes 1 inch through 26 inches, of the clamp or pinch valve design, incorporating clamp or pinch elements.... more | |||
| ANSI/ISA-75.10.02-2008 - Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150) | $32.00 | $36.00 | $40.00 |
| This document applies to valves, sizes NPS 1/2 (DN 15) through NPS 26 (DN 650), of the clamp or pinch valve design incorporating clamp or pinch elemen... more | |||
| ANSI/ISA-75.11.01-2013 - Inherent Flow Characteristic and Rangeability of Control Valves | $32.00 | $36.00 | $40.00 |
| The scope of this standard is to define the statement of typical control valve inherent flow characteristics and inherent rangeabilities, and to estab... more | |||
| ANSI/ISA-75.13.01-1996 (R2007) - Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output | $48.00 | $54.00 | $60.00 |
| This standard specifies tests designed to determine the performance of positioners with analog input signals and pneumatic output. The method of evalu... more | |||
| ISA-75.17-1989 - Control Valve Aerodynamic Noise Prediction | $32.00 | $36.00 | $40.00 |
| Scope:
This standard establishes a method to predict the noise generated in a control valve of standard design by the flow of compressible flu... more | |||
| ANSI/ISA-75.19.01-2007 - Hydrostatic Testing of Control Valves | $48.00 | $54.00 | $60.00 |
| This standard applies to control valves having bodies, bonnets, cover plates, and bottom flanges made of carbon steel, low alloy and high alloy (stain... more | |||
| ISA-RP75.23-1995 - Considerations for Evaluating Control Valve Cavitation | $72.00 | $81.00 | $90.00 |
| Scope:
This recommended practice is intended for control valves used in the control of process fluids and is not intended to apply to fluid po... more | |||
| ANSI/ISA-75.25.01-2000 (R2010) - Test Procedure for Control Valve Response Measurement from Step Inputs | $48.00 | $54.00 | $60.00 |
| This standard defines the testing and reporting of step response of control valves that are used in throttling closed loop control applications. A con... more | |||
| ANSI/ISA-TR75.25.02-2000 (R2010) - Control Valve Response Measurement from Step Inputs | $48.00 | $54.00 | $60.00 |
| This technical report describes the characteristic response of a control valve to step input signal changes. It considers the factors that affect this... more | |||
| ANSI/ISA-75.26.01-2006 - Control Valve Diagnostic Data Acquisition and Reporting | $60.00 | $67.50 | $75.00 |
| This document applies to all pneumatically operated, automated rotary or reciprocating, on/off, or modulating valves. It also includes automation comp... more | |||
| ISA-RP76.0.01-1998 - Analyzer System Inspection and Acceptance | $40.00 | $45.00 | $50.00 |
| Scope:
The attached inspection guidelines are recommended for use during structured analyzer system inspection. The inspection should be perfo... more | |||
| ANSI/ISA-76.00.02-2002 - Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals | $32.00 | $36.00 | $40.00 |
| Establishes properties and physical dimensions that define the interface for surface-mount fluid distribution components with elastomeric sealing devi... more | |||
| ANSI/ISA-77.13.01-1999 (R2008) - Fossil Fuel Power Plant Steam Turbine Bypass System | $48.00 | $54.00 | $60.00 |
| This standard covers the design requirements and operator interface for steam turbine bypass systems for drum and once-through steam generators and co... more | |||
| ANSI/ISA-77.14.01-2010 - Fossil Fuel Power Plant Steam Turbine Controls | $40.00 | $45.00 | $50.00 |
| This standard addresses steam turbine governor controls and overspeed protection of steam turbine generators in fossil power plants. Specifically excl... more | |||
| ANSI/ISA-77.20.01-2012 - Fossil Fuel Power Plant Simulators - Functional Requirements | $54.00 | $57.00 | $60.00 |
| The purpose of this standard is to establish the functional requirements for several types of plant-specific, fossil fuel power plant control room sim... more | |||
| ANSI/ISA-77.41.01-2010 - Fossil Fuel Power Plant Boiler Combustion Controls | $40.00 | $45.00 | $50.00 |
| The scope of this standard is to address the major combustion control subsystems in boilers with steaming capabilities of 200,000 lb/hr (25 kg/s) or g... more | |||
| ANSI/ISA-77.42.01-1999 (R2011) - Fossil Fuel Power Plant Feedwater Control System - Drum Type | $40.00 | $45.00 | $50.00 |
| This standard is intended to assist in the development of design specificaitons covering the measurement and control of feedwater systems in boilers w... more | |||
| ISA-TR77.42.02-2009 - , Fossil Fuel Power Plant Compensated Differential Pressure Based Drum Level Measurement | $40.00 | $45.00 | $50.00 |
| This Technical Report supplements ANSI/ISA-77.42.01, Fossil Fuel Plant Feedwater Control System-Drum Type, and provides recommendations for level meas... more | |||
| ANSI/ISA-77.43.01-2002 (R2008) - Fossil Fuel Power Plant Unit/Plant Demand Development–Drum Type | $48.00 | $54.00 | $60.00 |
| The purpose of this document is to establish the minimum requirements for the functional design specifications of unit/plant demand development for co... more | |||
| ANSI/ISA-77.44.01-2007 (R2013) - Fossil Fuel Power Plant - Steam Temperature Controls | $48.00 | $54.00 | $60.00 |
| The scope of this standard addresses the major steam temperature control subsystems in boilers with steaming capacities of 200,000 lb/hr (25 kg/s) or ... more | |||
| ISA-RP77.60.02-2010 - Fossil Fuel Power Plant Human-Machine Interface: Hard Panel Alarms | $40.00 | $45.00 | $50.00 |
| Provides advice and guidance in the development and design of plant alarm systems. The primary application for this recommended practice is fossil pow... more | |||
| ISA-TR77.60.04-1996 (R2008) - Fossil Fuel Power Plant Human-Machine Interface - Electronic Screen Displays | $48.00 | $54.00 | $60.00 |
| This report recognizes the substantial volumes of technical information already in existence on the topic of Electronic Screen Display development. Th... more | |||
| ISA-RP77.60.05-2001 (R2012) - ISA-RP77.60.05-2001 (R2012), Fossil Fuel Power Plant Human-Machine Interface: Task Analysis | $40.00 | $45.00 | $50.00 |
| Approaches are provided in this recommended practice for the applicaiton of task analysis during the conceptual design, preliminary design, and detail... more | |||
| ANSI/ISA-TR77.70.01-2010 - Tracking and Reporting of Instrument and Control Data | $48.00 | $54.00 | $60.00 |
| This technical report provides guidance in the design and function of a method for instrument tracking and documentation control that is adaptable for... more | |||
| ANSI/ISA-77.70.02-1994 (R2010) - Fossil Fuel Power Plant Instrument Piping Installation | $40.00 | $45.00 | $50.00 |
| This standard covers the mechanical design, engineering, fabrication, installation, testing, and protection of fossil power plant instrumentation sens... more | |||
| ANSI/ISA-77.82.01-2011 - Selective Catalytic Reduction (SCR) Control Systems | $40.00 | $45.00 | $50.00 |
| This standard addresses the control functions associated with the selective catalytic reduction systems on fossil-fired steam boilers greater than 20... more | |||
| ISA-82.03-1988 - Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment | $32.00 | $36.00 | $40.00 |
| Scope:
This standard applies to electrical, electronic (analog/digital) and electromechanical process measurement and control equipment whi... more | |||
| ANSI/ISA-84.00.01-2004 Part 1 (IEC 61511-1 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 1: Framework, Definitions, System, Hardware and Software Requirements | $359.00 | $270.00 | $419.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-84.00.01-2004 Part 2 (IEC 61511-2 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI/ISA-84.00.01-2004 Part 1 (IEC 61511-1 Mod) - Informative | $359.00 | $270.00 | $419.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-84.00.01-2004 Part 3 (IEC 61511-3 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 3: Guidance for the Determiniation of the Required Safety Integrity Levels - Informative | $292.00 | $225.00 | $342.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ISA-TR84.00.02-2002 - Parts 1-5, Safety Instrumented Functions (SIF) Safety Integrity Level (SIL) Evaluation Techniques Package | $336.00 | $378.00 | $420.00 |
| Provides the full set of five technical reports covering the performance based approach for evaluating the reliability of SIF and presenting system re... more | |||
| ISA-TR84.00.02-2002, Part 1 - Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction | $104.00 | $117.00 | $130.00 |
| Introduces the reader to the performance based approach for evaluating the reliability of SIF and presents system reliability methodologies that can b... more | |||
| ISA-TR84.00.02-2002, Part 2 - Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations | $72.00 | $81.00 | $90.00 |
| Provides one possible technique for calculating PFDavg values for Safety Instrumented Functions (SIF) installed in accordance with ANSI/ISA-84.01-1996... more | |||
| ISA-TR84.00.02-2002, Part 3 - Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis | $104.00 | $117.00 | $130.00 |
| Provides guidance on the application of Fault Tree Analysis (FTA) to SIF. FTA is one possible technique for calculating SIL for a SIF installed per A... more | |||
| ISA-TR84.00.02-2002, Part 4 - Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis | $88.00 | $99.00 | $110.00 |
| Provides one possible technique for calculating PFDavg values for Safety Instrumented Systems (SIS) installed in accordance with ANSI/ISA-84.01-1996. ... more | |||
| ISA-TR84.00.02-2002, Part 5 - Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis | $104.00 | $117.00 | $130.00 |
| The procedures and examples outlined in ISA-TR84.00.02, Part 5, provide the engineer with Markov modeling steps to be followed in determining a mathem... more | |||
| ISA-TR84.00.03-2012 - Mechanical Integrity of Safety Instrumented Systems (SIS) | $140.00 | $160.00 | $180.00 |
| Lifecycle phases 5 and 6 involve the installation and testing of the SIS, the validation that the SIS meets the safety requirements specification, and... more | |||
| ISA-TR84.00.04-2011, Part 1 - Guideline for the Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511) | $186.00 | $208.00 | $230.00 |
| ANSI/ISA-84.01-1996 has been retired and replaced with ANSI/ISA-84.00.01-2004 Parts 1-3 (IEC 61511 Mod). The new standard is the ANSI/ISA adoption of ... more | |||
| ISA-TR84.00.04-2005 Part 2 - Part 2: Example Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) | $72.00 | $81.00 | $90.00 |
| This technical report is intended to be used in conjunction with ISA-TR84.00.04-2005 Part 1 to provide an example that illustrates how to apply ANSI/I... more | |||
| ISA-TR84.00.05-2009 - Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS) | $88.00 | $99.00 | $110.00 |
| ISA-TR84.00.05 is intended to:
identify and classify SIFs within typical FMSs for typical operating modes of fired equipment (e.g., pre-f... more | |||
| ISA-TR84.00.06 - Safety Fieldbus Design Considerations for Process Industry Sector Applications | $72.00 | $81.00 | $90.00 |
| This technical report:
provides guidance on implementing Safety Fieldbus protocols and devices in safety instrumented systems in the proc... more | |||
| ISA-TR84.00.07-2010 - Guidance on the Evaluation of Fire and Gas System Effectiveness | $88.00 | $99.00 | $110.00 |
|
This technical report is informative and does not contain any mandatory requirements.
This technical report is intended to be used in ... more | |||
| ANSI/ISA-84.91.01-2012 - Identification and Mechanical Integrity of Safety Controls, Alarms, and Interlocks in the Process Industry | $48.00 | $54.00 | $60.00 |
| This standard addresses the instruments that are classified as process safety safeguards by the authority having jurisdiction (typically the owner/ope... more | |||
| ANSI/ISA-88.00.01-2010 - Batch Control Part 1: Models and Terminology | $144.00 | $162.00 | $180.00 |
| This Part 1 standard on Batch Control defines reference models for batch and related procedure-oriented manufacturing as used in the process industrie... more | |||
| ISA-88.00.02-2001 - Batch Control Part 2: Data Structures and Guidelines for Languages | $144.00 | $162.00 | $180.00 |
| Scope:
This Part 2 standard on Batch Control defines data models that describe batch control as applied in the process industries, data struct... more | |||
| ISA-TR88.00.02-2008 - Machine and Unit States: An Implementation Example of ISA-88 | $88.00 | $99.00 | $110.00 |
| The ISA88 committee has defined a batch standard series that provides terminology and a consistent set of concepts and models for batch manufacturing ... more | |||
| ANSI/ISA-88.00.03-2003 - Batch Control Part 3: General and Site Recipe Models and Representation | $104.00 | $117.00 | $130.00 |
| This Part 3 standard on Batch Control defines a model for general and site recipes; the activities that describe the use of general and site recipes w... more | |||
| ISA-TR88.0.03-1996 - Possible Recipe Procedure Presentation Formats | $40.00 | $45.00 | $50.00 |
| Defines format or graphical representation for recipes used in the automation of batch processing plants as defined in ANSI/ISA-88.01-1995.
Scop... more | |||
| ANSI/ISA-88.00.04-2006 - Batch Control Part 4: Batch Production Records | $104.00 | $117.00 | $130.00 |
| This Part 4 standard defines a reference model for batch production records containing information about production of batches or elements of batch pr... more | |||
| ISA-TR88.95.01-2008 - Using ISA-88 and ISA-95 Together | $88.00 | $99.00 | $110.00 |
| When the ISA-88 and ISA-95 standards are applied together in an application or project, some of
the terminologies, models and key definitions in thes... more | |||
| ISA-TR91.00.02-2003 - Criticality Classification Guideline for Instrumentation | $48.00 | $54.00 | $60.00 |
| This guideline is developed to assist engineering, operations, and maintenance personnel with establishing the classification of their instrumentation... more | |||
| ANSI/ISA-92.00.01-2010 - Performance Requirements for Toxic Gas Detectors | $60.00 | $67.50 | $75.00 |
| This standard provides minimum requirements for the construction, performance, and testing of portable, transportable, mobile, and stationary electric... more | |||
| ISA-RP92.0.02, Part II-1998 (R2013) - Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments: Hydrogen Sulfide | $40.00 | $45.00 | $50.00 |
| ISA-RP92.0.02, Part II, establishes user criteria for the installation, operation, and maintenance of toxic gas detection instruments.... more | |||
| ISA-RP92.02.02, Part II-1998 (R2013) - Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale) | $48.00 | $54.00 | $60.00 |
| ISA-RP92.02.02, Part II establishes user criteria for the installation, operation, and maintenance of carbon monoxide gas detection instruments.... more | |||
| ISA-RP92.03.02-1999 (R2013) - Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppm Full Scale) | $40.00 | $45.00 | $50.00 |
| ISA-RP92.03.02 establishes user criteria for the installation, operation, and maintenance of ammonia gas-detection instruments.... more | |||
| ANSI/ISA-92.04.01, Part I-2007 (R2013) - Performance Requirements for Instruments Used To Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres | $48.00 | $54.00 | $60.00 |
| This standard addresses the details of construction, performance, and testing of portable, mobile, and stationary electrical instruments used to provi... more | |||
| ISA-RP92.04.02, Part II-1996 (R2013) - Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres | $48.00 | $54.00 | $60.00 |
| ISA-RP92.04.02 establishes user criteria for the installation, operation, and maintenance of instruments used to detect oxygen-deficient/oxygen-enrich... more | |||
| ISA-RP92.06.02-1999 - Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppm - Full Scale) | $40.00 | $45.00 | $50.00 |
| This recommended practice establishes user criteria for the installation, operation, and maintenance of chlorine gas-detection instruments. Its compa... more | |||
| ANSI/ISA-TR92.06.03-2008 (R2013) - Feasibility of Chlorine Detection Instrument Testing | $40.00 | $45.00 | $50.00 |
| This report has been written to provide support to the work of the ISA92.06 Subcommittee responsible for drafting a performance standard for chlorine ... more | |||
| ISA-93.00.01-1999 - Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves | $40.00 | $45.00 | $50.00 |
| Applies to the classification of valve design and provides the methods for the testing of valve stem(s) and body seal(s). Not intended for production ... more | |||
| ANSI/ISA-95.00.01-2010 (IEC 62264-1 Mod) - Enterprise-Control System Integration - Part 1: Models and Terminology | $394.00 | $333.00 | $468.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-95.00.02-2010 (IEC 62264-2 Mod) - Enterprise-Control System Integration - Part 2: Object Model Attributes | $380.00 | $333.00 | $454.00 |
| This part (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members... more | |||
| ANSI/ISA-95.00.03-2005 - Enterprise-Control System Integration, Part 3: Models of Manufacturing Operations Management | $104.00 | $117.00 | $130.00 |
| This standard defines activity models of manufacturing operations management that enable an enterprise system to control system integration. The acti... more | |||
| ANSI/ISA-95.00.04-2012 - Enterprise-Control System Integration - Part 4: Objects and attributes for manufacturing operations management integration | $104.00 | $117.00 | $130.00 |
| This ISA-95 Part 4 standard, in conjunction with ANSI/ISA-95.00.03-2005, Enterprise-Control System Integration–Part 3: Activity Models of Manufacturin... more | |||
| ANSI/ISA-95.00.05-2007 - Integration, Part 5: Business-to-Manufacturing Transactions | $104.00 | $117.00 | $130.00 |
| Downloadable Version - This ISA-95 Part 5 standard defines transactions in terms of information exchanges between applications performing business and... more | |||
| ANSI/ISA-96.02.01-2007 - Guidelines for the Specification of Electric Valve Actuators | $40.00 | $45.00 | $50.00 |
| This standard provides general requirements for the development of specifications for electric actuators.... more | |||
| ANSI/ISA-96.03.01-2012 - Guidelines for the Specification of Heavy Duty Pneumatically Powered Quarter Turn Valve Actuators | $40.00 | $45.00 | $50.00 |
| This standard provides general requirements for the development of specifications for pneumatic scotch yoke actuators.
This document applies to act... more | |||
| ANSI/ISA-96.03.03-2013 - Guidelines for the Specification of Pneumatic Vane Type Valve Actuators | $40.00 | $45.00 | $50.00 |
| This standard provides general requirements for the development of specifications for pneumatic vane type actuators.
This document applies to actua... more | |||
| ANSI/ISA-TR96.05.01-2008 - Partial Stroke Testing of Automated Block Valves | $40.00 | $45.00 | $50.00 |
| ANSI/ISA-TR96.05.01 is limited to automated valves normally operating in either a full open or full closed position and provides guidance on the follo... more | |||
| ANSI/ISA-98.00.01-2002 - Qualifications and Certification of Control System Technicians | $60.00 | $67.50 | $75.00 |
| This standard identifies the recommended criteria for certification of control system technicians. These criteria address qualifications based on edu... more | |||
| ISA-TR98.00.02-2006 - Skill Standards for Control System Technicians | $48.00 | $54.00 | $60.00 |
| This document is intended to supply a general list of work-oriented functions, activities, tasks and duties that an instrument, instrument/electrical,... more | |||
| ANSI/ISA-99.00.01-2007 - Security for Industrial Automation and Control Systems Part 1: Terminology, Concepts, and Models | $104.00 | $117.00 | $130.00 |
| This is the first in a series of ISA standards that addresses the subject of security for industrial automation and control systems. The focus is on t... more | |||
| ANSI/ISA-TR99.00.01-2007 - Security Technologies for Industrial Automation and Control Systems | $104.00 | $117.00 | $130.00 |
| This ISA technical report provides a current assessment of various cyber security tools, mitigation counter-measures, and technologies that may effect... more | |||
| ANSI/ISA-99.02.01-2009 - Security for Industrial Automation and Control Systems: Establishing an Industrial Automation and Control Systems Security Program | $144.00 | $162.00 | $180.00 |
| This standard is part of a multipart series that addresses the issue of security for industrial
automation and control systems. It has been developed... more | |||
| ISA-TR100.00.01-2006 - The Automation Engineer's Guide to Wireless Technology Part 1 : The Physics of Radio, a Tutorial | $104.00 | $117.00 | $130.00 |
| This technical report presents a general tutorial on the basic principles of radio communications, and then discusses the performance of spread spectr... more | |||
| ISA-TR100.00.02-2009 - The Automation Engineer's Guide to Wireless Technology: Part 2 - A Review of Technologies for Industrial Asset Tracking | $72.00 | $81.00 | $90.00 |
| This technical report presents a number of technologies that, as of the date of this document, are under consideration for deployment and utilization ... more | |||
| ISA-TR100.00.03-2011 - Wireless User Requirements for Factory Automation | $72.00 | $81.00 | $90.00 |
| This technical report presents descriptive user and market-related requirements of wireless communication in factory automation applications. It provi... more | |||
| ANSI/ISA-100.11a-2011 - Wireless systems for industrial automation: Process control and related applications | $176.00 | $198.00 | $220.00 |
| This ISA standard is intended to provide reliable and secure wireless operation for non-critical monitoring, alerting, supervisory control, open loop ... more | |||
| ISA-TR100.14.01-Part I-2011 - Trustworthiness in Wireless Industrial Automation: Part 1, Information for End Users and Regulators | $72.00 | $81.00 | $90.00 |
| This document contains introductory material and information intended to demonstrate to the
reader that wireless is a viable solution today. The read... more | |||
| ISA-TR100.15.01-2012 - Backhaul Architecture Model: Secured Connectivity over Untrusted or Trusted Networks | $104.00 | $117.00 | $130.00 |
| This document presents an architectural model for interconnecting automation system elements over untrusted backhaul networks. The focus is on wireles... more | |||
| ANSI/ISA-TR104.00.03-2010 - Meeting the requirements for integrating fieldbus devices in engineering tools for field devices | $48.00 | $54.00 | $60.00 |
| This technical report provides an evaluation and assessment of EDDL technology. It provides guidance to device and system manufacturers for how EDDL t... more | |||
| ANSI/ISA-107.1-2013 - Industry Standard File Format for Revolution-Based, Tip Timing Data | $40.00 | $45.00 | $50.00 |
| This standard presents the file format to be utilized for data acquired by a revolution-based tip timing data system. It provides the following:
<u... more | |||
| ANSI/ISA-60079-0 (12.00.01)-2009 - Explosive atmospheres - Part 0: Equipment - General Requirements | $372.00 | $333.00 | $446.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-1 (12.22.01)-2009 - Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d" | $337.00 | $270.00 | $397.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-11 (12.02.01)-2012 - Explosive Atmospheres - Part 11: Equipment protection by intrinsic safety "i" (6th Edition) | $395.00 | $470.00 | $545.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-15 (12.12.02)-2012 - Explosive Atmospheres - Part 15: Equipment protection by type of protection "n" (Edition 4) | $340.00 | $380.00 | $420.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-18 (12.23.01)-2012 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" | $205.00 | $223.00 | $241.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-2 (12.04.01)-2010 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures "p" | $292.00 | $225.00 | $342.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-25 (12.02.05)-2011 - Explosive Atmospheres - Part 25: Intrinsically safe electrical systems | $359.00 | $389.00 | $419.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-26 (12.00.03)-2011 - Explosive atmospheres - Part 26: Equipment for Use in Class I, Zone 0 Hazardous (Classified) Locations | $154.00 | $164.00 | $177.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-28 (12.21.02)-2012 - Explosive Atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | $227.00 | $252.00 | $277.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-29-2 (12.13.02)-2012 - Explosive Atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen | $372.00 | $402.00 | $432.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-31 (12.10.03)-2009 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" | $60.00 | $67.50 | $75.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-5 (12.00.04)-2009 - Explosive atmospheres - Part 5: Equipment Protection by Powder Filling "q" | $154.00 | $117.00 | $180.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-6 (12.00.05)-2009 - Explosive atmospheres - Part 6: Equipment Protection by Oil Immersion "o" | $88.00 | $99.00 | $110.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-7 (12.16.01)-2008 - Explosive Atmospheres - Part 7: Equipment protection by increased safety "e" | $359.00 | $270.00 | $419.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-60079-27 (12.02.04)-2006 - Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) | $60.00 | $67.50 | $75.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61010-031 (82.02.02)-2007 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | $336.00 | $378.00 | $420.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61010-1 (82.02.01)-2012 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements | $401.00 | $438.00 | $475.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61010-2-030 (82.02.03)-2012 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Testing and Measuring Circuits | $205.00 | $227.00 | $249.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-10 (12.10.05)-2004 - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations | $104.00 | $117.00 | $130.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-11 (12.10.04)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD" | $88.00 | $99.00 | $110.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-18 (12.10.07)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "mD" | $120.00 | $135.00 | $150.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-0 (12.10.02)-2006 (R2011) - Electrical Apparatus for Use in Zone 20, Zone 21, and Zone 22 Hazardous (Classified) Locations - General Requirements | $176.00 | $198.00 | $220.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-1 (12.10.03)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD" | $88.00 | $99.00 | $110.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61241-2 (12.10.06)-2006 (R2011) - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD" | $104.00 | $117.00 | $130.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-61804-3 (104.00.01)-2007 - Function Blocks (FB) for Process Control - Part 3: Electronic Device Description Language (EDDL) | $451.00 | $378.00 | $535.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-TR61804-4 (104.00.02)-2007 - Function Blocks (FB) for Process Control - Part 4: EDD Interoperability Guideline | $200.00 | $225.00 | $250.00 |
| (Please note that this ISA document is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-62381-2011 (IEC 62381 Modified) - Automation Systems in the Process Industry - Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and Site Integration Test (SIT | $227.00 | $247.00 | $267.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
| ANSI/ISA-62382-2012 (IEC 62382 Modified) - Automation Systems in the Process Industry - Electrical and Instrumentation Loop Check | $154.00 | $169.00 | $184.00 |
| (Please note that this ISA standard is an IEC adoption with modifications. Therefore, the "Free Preview for Members" option i... more | |||
See the list of Administratively Withdrawn ISA Standards and Recommended Practices.
Go to ANSI's NSSN Service.
Follow Us