International Society of Automation Building Automation Systems Technical Interest Group
The focus of the BASTIG is based on how capitalize on ISA’s 66 years of automation knowledge and apply that to the building automation vertical. ISA openly acknowledges others have made significant contributions to the vertical application of automation within buildings, and that building automation does have different requirements. But that is the case with many different verticals; packaging automation is not the same as oil & gas automation. Yet our methodology allows us to pull the best from the many different verticals represented in order to assist all of them. It allows us to build a common base to improve productivity, training, certifications, and to advance the profession.
The purpose of this group is to be a home for building automation professionals within the larger automation society, to allow us to gain a consensus within our vertical market, and to use that as a basis for making change within the industry. The BASTIG will start by marketing ourselves to peers as a source of certification and education.
BASTIG is not a competing set of standards, but rather a set of complimentary ones. Other SDOs have done some marvelous work for Building Automation, and it is not our intent or purpose to replace or diminish the value of that work. Rather BASTIG is going to work on those areas that ISA has a long history of success and bring that over to BAS. The group has established the following standards as the starting point for that effort:
- ISA 75 (Valves)
- ISA 96 (Actuators)
- ISA 20 (Specification Forms)
- ISA 5 (Documentation)
- ISA 99 (Control System Security)
- ISA 101 (Human Factors)
- ISA 18 (Alarm Management)
- ISA 105 (Commissioning)
Many of these standards call upon the same manufacturers to supply all the different verticals. By using the same standards as bases we can more easily affect the differences needed for our industry by cooperating rather than competing. To make these happen key members of this group will be meeting to select up to three of the above mentioned standards to review and write Recommended Practice advisories.
ISA, through the Automation Federation, is working with CABA to provide education, training, and certifications for building automation professionals. Some of the courses ISA has available include:
- Introduction to Building Automation Systems
- Mathematics for Instrumentation Technicians
- Fundamentals of Industrial Process, Measurement, and Control
- Introduction to Industrial Automation and Control
- Process and Laboratory Analytical Technologies Overview
- Developing and Applying Standard Instrumentation and Control Documentation
- Sizing, Selecting, and Applying Process Control Valves
- Applying Motor Controls and Drives
- Industrial Data Communications Systems
- Industrial Networking & Security
- SCADA Systems Integration
- Boiler Control Systems Engineering
- Burner Management Systems Engineering Using NFPA Code 85 and ANSI/ISA77 Standards
- System Checkout, Testing, and Startup
- Establishing a Standards-Based Calibration Program
- Project Management for Automation and Control
- Advanced Project Management for Team Leaders
- Advanced Operation of Digital Valve Controllers
- Maintaining Pneumatic Components in Measurement and Control
- Installing, Calibrating, and Maintaining Electronic Instruments
- Electrical Systems and Principles
- Industrial Electronics
- Electrical Noise Effects on Instrumentation Control Equipment
- PLC/PAC AUTOMATION: Advanced System Integration, Programming and Design
- PLC/PAC Automation: Basic Structure, Programming, Installation, and Maintenance
- Tuning Control Loops
- Troubleshooting Instrumentation and Control Systems
In addition to these classes, ISA sponsors two certifications for the automation industry. The first is the Certified Automation Professional. The CAP is geared towards those are engineers or designers of automation systems, or those who manage or consult to them. The second is targeted at technicians, and is the Certified Control Systems Technician. The CCST comes in three grades to help clarify where an individual is in their growth path. Both certifications have an application process that includes verification of education, experience, and testing of knowledge.
BASTIG will be working with both the Education and Certification groups within ISA to continue to refine offerings and servicing the building automation market segment. Generally we believe that we have these very well covered to start with.
BASTIG will also be doing outreach to help Authorities Having Jurisdictions determine what assistance they need for building automation. Currently their job is very convoluted with no less than four different codes covering the automation components in most jurisdictions. As many are aware, poorly tuned systems can account for huge energy losses, safety issues, and basic operational needs in buildings.