Saf-D-Grid connector system

The Saf-D-Grid connector system is for use in the direct connection of DC electronic devices to a DC micro grid. This connector system is ideal for use in DC servers or any device connecting directly to renewable energy sources such as solar or wind power. The Saf-D-Grid meets international safety requirements for low voltage applications to 400 VDC including UL950 and IEC60950. The low profile panel receptacle is designed to fit the standard panel cut-out for IEC320 C14 outlets while providing touch safe connections up to 20 amperes at 600 VDC. The connectors are hot plug rated up to 700A in-rush current at 400 volts and shield the user from arc flash during un-mating. Additional safety features include a first mate, last break contact to provide ground and an integral latch to prevent connectors from accidental un-mating. The rugged polycarbonate housings are UL94 V-0 rated and plug power cords, over-molded to provide both strain relief during mating and un-mating, are available in 2 meter, 3 meter, and 5 meter lengths in both single and double ended styles.