WAVEPak DC/DC isolator

The WAVEPak DC/DC isolator is a cost-effective, adjustable conditioning solution for applications with high-level signals, such as flow transmitters in process applications. WAVEPak is designed to interface between field equipment and control systems, converting and isolating signals with a high level of accuracy that exceeds 0.1%. A four-wire DC isolator with complete three-way isolation, its voltage or current inputs and outputs can be internally selected, and easily scaled via pushbuttons located on the front of the module. Outputs can be configured as direct or reverse action, as required by the application. The WAVEPak DC/DC gives users the ability to select either current sink or loop-powered input mode, allowing the module to be an active or passive input circuit. 24VDC power for two-wire transmitters also provides the flexibility to drive additional load in an active input loop, which simplifies field wiring and reduces the need for field device power supplies. The WAVEPak DC/DC has several features designed to simplify installation and reduce system commissioning and maintenance time. The integrated test terminals allow testing of input and output current values without removing cables. LED indicators display the signal status, for quick and easy trouble shooting and maximized system uptime. Weidmuller’s high quality, pluggable field terminals allow quick-release and provide the most secure connections available.